0 items

Secure Checkout
All CategoriesANTENNASROTATORANTENNA ACCNEW PRODUCTSADAPTORMASTS

Product Search
Site Menu

Sister Companies

Associated Companies






 Company News
Call Toll Free: 1-800-973-6572 or Call: 1-662-323-9538
NEW 2017 Summer/Fall Catalog!
Slidell Hamfest
Slidell, LA

July 15, 2017
COMPANY NEWS:
(NEW)Loop Fed Array Antennas!!
(NEW PRODUCT) Band Optimized Log Periodic Array
MFJ to be exclusive US distributor of Messi & Paoloni Coax Cables!
SITE NEWS:
At 9 am GMT every Monday and Tuesday, we will be performing server reboots causing the systems to be down for approximately 10 to 15 minutes!

** FEATURED PRODUCTS **
LFA-6M4EL
LOOP FED YAGI, 6M 4EL ARRAY, 5KW

$ 369.95 each

Hy-gain’s computer optimized third generation G0KSC Loop Fed Array (LFA) yagis are specifically designed for low noise -- hear weak signals that others can’t!

Highly suppressed side lobes eliminate unwanted noise and signal pickup from the sides making your desired signal pop out!

See and hear for yourself how signals pop out from a low-noise G0KSC LFA as compared to a top performing yagi at (www.hy-gain.com/LFA-6M5EL).

These wide-spaced LFA yagis have lower SWR, higher gain, better front-to-back and more broadbanded than dipole fed yagis.

hy-gain’s direct 50-Ohm feed has no lossy matching network that limits power handling. hy-gain LFAs handle 5,000 Watts. Your actual operational power is limited by your coax, connectors and other accessories.

hy-gain LFAs are also computer optimized for maximum strength using hy-gain’s exceptionally strong tooled parts to give years of reliable service.

All hy-gain Super Heavy Duty 6-Meter LFAs have a 2-inch diameter double walled boom, 5/8” fully insulated elements and 7/16” outer tip sections. Climb your tower only once!

CLICK HERE for full specifications including SWR curves, pattern plots, gain, wind loading, wind survival, front-to-back, more.




  • Tooled Manufacturing

  • Highest Quality Materials



  1. Hy-Gain`s famous super strong tooled die cast Boom-to-Mast Clamp

  2. Tooled Boom-to-Element Clamp

  3. Thick-wall swaged aluminum tubing









Tooled manufacturing is the difference between Hy-Gain antennas and the others they just don`t have it, it`s too expensive!

Die-cast aluminum boom-to-mast bracket and element-to-boom compression clamps are made with specially tooled machinery.

Hy-Gain antennas feature tooled swaged tubing that is deburred and cleaned for smooth, easy and secure assembly.

Durable precision injection molded parts.

Hy-gain antennas are stronger, lighter, have less wind surface area, better wind survival, need no adjustments, look professional and last years longer.













6M4EL-SWR 6M4EL-AZ
6M4EL-EL 6M4EL-GAIN-FB



LFA-2M9EL
LOOP FED YAGI, 2M 9 EL ARRAY, 5KW


$ 279.95 each

Hy-gainís computer optimized third generation G0KSC Loop Fed Array (LFA) yagis are specifically designed for low noise -- hear weak signals that others canít!

Highly suppressed side lobes eliminate unwanted noise and signal pickup from sides making your desired signal pop out!

See and hear for yourself how signals pop out from a low-noise G0KSC LFA as compared to a top performing yagi at (www.hy-gain.com/LFA-2M9EL).

Wide-spaced LFA yagis have lower SWR, higher gain, better front-to-back and more broadbanded than dipole fed yagis.

Hy-gainís direct 50-Ohm feed has no lossy matching network that limits power handling. hy-gain LFAs handle 5,000 Watts. Your actual operational power is limited by your coax, connectors and other accessories.

Hy-gain LFAs are also computer optimized for maximum mechanical strength using hy-gainís exceptionally strong tooled parts to give you years of reliable service.

All hy-gain 2-Meter LFAs have heavy duty 1.25-inch dia-meter booms, fully insulated elements and outer tip sections. Climb the tower only once!

CLICK HERE for full specifications including SWR curves, pattern plots, gain, wind loading, wind survival, front-to-back, and more.




  • Tooled Manufacturing

  • Highest Quality Materials



  1. Hy-Gain`s famous super strong tooled die cast Boom-to-Mast Clamp

  2. Tooled Boom-to-Element Clamp

  3. Thick-wall swaged aluminum tubing









Tooled manufacturing is the difference between Hy-Gain antennas and the others they just don`t have it, it`s too expensive!

Die-cast aluminum boom-to-mast bracket and element-to-boom compression clamps are made with specially tooled machinery.

Hy-Gain antennas feature tooled swaged tubing that is deburred and cleaned for smooth, easy and secure assembly.

Durable precision injection molded parts.

Hy-gain antennas are stronger, lighter, have less wind surface area, better wind survival, need no adjustments, look professional and last years longer.






AV-18VS
VERTICAL, 80-10M, BASE LOADED, 18


$ 119.95 each

The 18 foot AV-18VS radiator has a loading coil at its base that allows precision antenna resonating. The AV-18VS may be installed on a short 1-5/8 inch diameter mast driven into the ground. It is also ideal for shortwave listening.




AV-18VS Specifications
Electrical Specifications

Bands
10, 15, 20, 40, and 80 Meters
Max Power
1500 Watts PEP
Mechanical Specifications

Height
18 feet
Weight4 pounds
Wind Survival
80 MPH
Recommended Mast Size
1.5 in - 1.625 in. OD


VB-214FM
14 ELEMENT 2M WITH BETA MATCH ACCEPTS 2 MAST 13.0


$ 99.95 each
These 2 Meter FM beam antennas include Hy-Gains exclusive BetaMatch to provide exceptional Front-to-Back ratio and maximum obtainable gains. The VB-214FM gives you a wide choice of 2 Meter Beam performance from which to choose. Accepts up to 2 inch mast.


SPT-500
VERTICAL, 10/12, PENETRATOR, 1.5KW


$ 149.95 each
This fantastic true full-size 5/8 Wave 10 / 12 Meter vertical antenna from Hy-Gain was a legend in the 70ís . . . now itís back to prove its legendary status once again!

A Full-size radiator with lower radiation angle concentrates power closer to the ground, where you want it. Measures 22 foot, 9.5 inches. Larger diameter, heavy wall ply-tubular construction makes the new Super-Penetrator™ the absolute top omnidirectional antenna around! Four full-length radials and special machine-formed brackets give extra talk-power and overall strength.

Electrical performance has been increased to a new standard by the use of a longer radiator and double-matching tuning with linear phasing techniques that provide low SWR and more radiated energy. The double-matching also provides a DC path to ground to drain off precipitation static, giving an extremely low noise antenna capable of high power.

SPT-500 is specifically designed to accept AM-FM-SSB-DSB signals with low loss. Handles 1.5 killowatts. This antenna is illegal for 11 Meters use.

SPT-500 Antenna Specifications
Gain (dB)5.3 dB
SWR (at resonance)Less than 1.2:1
Nominal input impedance52 Ohms
Lightning ProtectionDC Ground
HeightTwenty-two feet, six inches
Radial LengthEight feet nine inches
Wind (Survival)80 MPH
Accepted mast size1 ľĒ to 1 ⅝Ē OD


APT-2
ANT PIGTAIL RG-58, CABLE, 24 620-3016


$ 12.95 each
Hy-Gains Antenna Feedpoint Pig Tail cable has 2-foot lenght for connecting between antenna and your coaxial feedline.

Has SO-239 connector on one end and 2 (#10) ring terminals on the other end.

Provides an easy and reliable connection for your feedline with PL-259 connector to your antnena feed point.

Use this for Hy-gain VB series beams and other antennas without an SO-239 connector feed point.


AV-640
HF VERTICAL, 8 BANDS-40/30/20/17/15/12/10/6 M


$ 449.95 each

Hy-Gains new AV-640 Patriot HF vertical is the best built, best performing and best priced multiband vertical available today. Make full use of your sunspot cycle with the Patriots low angle signal. The AV-640 uses quarter wave stubs on 6, 10, 12, and 17 meters and efficient end loading coil and capacity hats on 15, 20, 30, 40 meters. Instead of typical lossy can traps, the AV-640 resonators are placed in parallel not in series. End loading of the lower HF bands allows efficient operation with a manageable antenna height.


  • No Ground or Radials Needed
    • Effective counterpoise replaces radials
    • End fed with broadband matching unit

  • Automatic Bandswitching
    • Single coax cable feed

    • Each band is individually tunable
    • Wide VSWR bandwidth

  • Sleek and low-profile
    • Low wind surface area

    • Small area required for mounting
    • Mounts easily on decks, roofs, and patios
  • Built to Last
    • High wind survival

    • Matching unit made from all Teflon(R) insulated wire
  • Hy-Gain Warranty
    • Two year limited warranty
    • All replacement parts in stock






AV-640 Specifications
Bands Covered: 6, 10, 12, 15, 17, 20, 30, and 40 Meters
2:1 VSWR Bandwidth
40 Meter: 150 KHz
30 Meter: 175 KHz

20 Meter:
500 KHz
17 Meter:500 KHz
15 Meter:
500 KHz
12 Meter:500 KHz
10 Meter: 1500 KHz

6 Meter:
1500 KHz
VSWR at resonance (typical):
1.5:1
Power Handling (Watts output):
key down 2 minutes
1500W
Vertical Radiation Angle:17 degrees
Horizontal Radiation Angle:360 degrees
Height:25.5 feet
Weight:10.5 pounds
Wind surface area:2.5 square feet
Wind Survival:
80 MPH


BN-4000B
BEAM BALUN, 1-54 MHZ, 4KW, SO-239


$ 109.95 each

The BN-4000B broadband 50 Ohm Beam current balun is potted to seal out moisture. Rated at 4000 Watts for increased power handling capabilities. Frequency range is 1 MHz to 54 MHz. It comes with a SO-239 connector.



HAM-VII
ROT, HAM-IV WITH DCU-3,110 VAC


$ 799.95 each
HAM-VII with DCU-3 Automatic Digital Controller. . . for medium antenna arrays up to 15 square feet

Like HAM-V, but has DCU-3.



RPM-1
ROTATOR, POT, 500 OHM, (5023100)(5146010)H4/T2X/CD


$ 39.95 each
Rotator Potentiometer

The RPM-1 is the 500 ohm Indicator potentiometer for all T2X, HAM-II, HAM-III, HAM-IV, HAM-V and CD-45II High-gain rotators. It has a silver plated contact point that makes for smooth traveling, longer lasting and more reliable contact between the pot strip and wiper arm.


CD-45II
METERED ROTATOR W/FRICTION BRAKE 8.5 SF MT N TOWER


$ 449.95 each

The CD-45II handles 8.5 sq. feet mounted inside a tower, or 5 sq. ft. with mast adapter. Low temperature grease good to -30 F degrees. Bell rotator design gives total weather protection, dual 24 ball bearing races gives proven support.


Die cast ring gear, stamped steel gear drive, heavy duty, trouble free gear train. North center scale, dual lighted directional meter indicator, 8-pin plug/socket on control unit, snap-action control switches. Low voltage control. Safe operation, takes masts to 2 1/16". MSLD light duty lower mast support adapter included. Power requirements: 110V 60Hz.


CD-45II Rotator Specifications
Wind Load Capacity (inside tower)
8.5 square feet
Wind Load Capacity (with mast adapter)5.0 square feet
Turning Power600 pounds
Brake Power800 pounds
Brake Construction
Disc Brake

Bearing Assembly
Dual race/48 ball bearings
Mounting HardwarePlate clamps/Steel U-Bolts

Control Cable Conductors
8
Shipping Weight22 pounds
Effective Moment (in tower) 1200 ft/lbs.


HAM-IV
ROTATOR, 15 SF WIND LOAD, 110 VAC


$ 649.95 each
HAM-IV is the most popular rotator in the world ! Itís solidly constructed, has been time-tested and proven for over twenty years.

HAM-IV is for medium communications arrays up to 15 square feet wind load area (7.5 sq. ft. with mast adapter). It has 800 inches-lbs. turning power and 5000 inches-lbs. brake power.

Automatic 5-second brake delay insures that the rotator is fully stopped before the brake is engaged. No more accidentally engaging the brake while the rotator is in movement.

New Test/Calibrate function. New low temperature grease permits normal operation down to -30įF. New alloy ring gear gives extra strength to 100,000 PSI for maximum reliability.

New indicator potentiometer has been improved for greater reliability. Silver-plated relay contact point makes for smooth traveling and more reliable contact between pot strip and wiper arm - gives years longer life span on these important, internal components.

Detachable 8 pin latching Cinch connectors make easy removal at rotator and 8 pin plug at controller. Dual 98 ball bearing race for load bearing strength and electric locking steel wedge brake prevents wind induced antenna movement. North or South center of rotation scale on meter, low voltage control, max mast size 2 1/16Ē.110 VAC.

Order HAM-IVX for 220 VAC operation. Optional lower mast support, MSHD


HAM-IV Rotator Specifications
Wind Load Capacity (inside tower)15 square feet
Wind Load (w/ Mast Adapter)7.5 square feet
Turning Power 800 pounds
Brake Power5000 pounds
Brake ConstructionElectric Wedge
Bearing AssemblyDual race/96 ball bearings
Mounting HardwareClamp Plates/Steel U-Bolts
Control Cable Conductors8
Shipping Weight24 pounds
Effective Movement (in tower) 2800 ft/lbs.


SPT-500
VERTICAL, 10/12, PENETRATOR, 1.5KW


$ 149.95 each
This fantastic true full-size 5/8 Wave 10 / 12 Meter vertical antenna from Hy-Gain was a legend in the 70ís . . . now itís back to prove its legendary status once again!

A Full-size radiator with lower radiation angle concentrates power closer to the ground, where you want it. Measures 22 foot, 9.5 inches. Larger diameter, heavy wall ply-tubular construction makes the new Super-Penetrator™ the absolute top omnidirectional antenna around! Four full-length radials and special machine-formed brackets give extra talk-power and overall strength.

Electrical performance has been increased to a new standard by the use of a longer radiator and double-matching tuning with linear phasing techniques that provide low SWR and more radiated energy. The double-matching also provides a DC path to ground to drain off precipitation static, giving an extremely low noise antenna capable of high power.

SPT-500 is specifically designed to accept AM-FM-SSB-DSB signals with low loss. Handles 1.5 killowatts. This antenna is illegal for 11 Meters use.

SPT-500 Antenna Specifications
Gain (dB)5.3 dB
SWR (at resonance)Less than 1.2:1
Nominal input impedance52 Ohms
Lightning ProtectionDC Ground
HeightTwenty-two feet, six inches
Radial LengthEight feet nine inches
Wind (Survival)80 MPH
Accepted mast size1 ľĒ to 1 ⅝Ē OD


AV-18VS
VERTICAL, 80-10M, BASE LOADED, 18


$ 119.95 each

The 18 foot AV-18VS radiator has a loading coil at its base that allows precision antenna resonating. The AV-18VS may be installed on a short 1-5/8 inch diameter mast driven into the ground. It is also ideal for shortwave listening.




AV-18VS Specifications
Electrical Specifications

Bands
10, 15, 20, 40, and 80 Meters
Max Power
1500 Watts PEP
Mechanical Specifications

Height
18 feet
Weight4 pounds
Wind Survival
80 MPH
Recommended Mast Size
1.5 in - 1.625 in. OD


AV-18HT
HY-TOWER, 10/15/20/40/80M, 50FT VERTICAL


$ 999.95 each

The AV-18HT features automatic band selection achieved through a unique stub decoupling system which effectively isolates various sections of the antenna so that an electrical 1/4 wavelength (or odd multiple of a 1/4 wavelength) exists on all bands. Approximately 250 kHz bandwidth at 2:1 VVSWR on 80 Meters. With the addition of a base loading coil (LC-160Q) it also provides exceptional 160 Meters performance. Includes all stainless steel hardware and til-over base. Unity gain on 20, 40, 80; 2 dB on 10/15 Meters.



You can view a detailed photo explanation of installation at the following web address: http://home.centurytel.net/badgerlake/Hamradio/18ht/18-ht.htm. Thanks to WA7QJY for the link.




AV-18HT Specifications
Electrical Specifications

Bands
10, 15, 20, 40, and 80 Meters (optional mod for 160 Meters)
Max Power 1500 Watts PEP

Input Connector
SO-239
Mechanical Specifications

Height
53 feet
Weight114 pounds
Wind Survival75 MPH
Recommended Mast Sizen/a






T-2X
ROTATOR, 20 SF WIND LOAD, 110 VAC
$799.95 each



CD-45II
METERED ROTATOR W/FRICTION BRAKE 8.5 SF MT N TOWER
$449.95 each



AV-640
HF VERTICAL, 8 BANDS-40/30/20/17/15/12/10/6 M
$449.95 each



BN-4000B
BEAM BALUN, 1-54 MHZ, 4KW, SO-239
$109.95 each




All information, images, and documents on this website are the sole property of Hygain Any reuse or redistribution of the contents of this website are strictly forbidden without authorization from Hygain
Enter your callsign to see if you have an eQSL waiting!