70 21.3M NESTED HEIGHT 21.5 6.6M
Click Image For Larger Picture
HG-70HD$ 4,579.95 Each
70 ft self-supporting tower
This model is a 70-foot, self-supporting tower designed to support 16.0 square feet of antenna area with winds up to 60 mph. This all steel tower has a guide system that allows the tubing to be open at each end insuring complete galvanizing and total moisture drainage.
The tower can be extended from its nested position by manual crank or the use of an electric motor. A thrust bearing can be bolted to the top section allowing a 2" The top tower section is designed for a predrilled rotator plate (supplied with the tower) and will accept mounting of a CDE, HAM-M, Tailtwister, or Hy-Gain Antenna Rotators.
The HG-70HD tower is supplied complete, including reinforcing steel and base mount.
Height (fully extneded) - 70 feet (21.33 meters)
Height (nested) - 22 feet (6.7 meters)
Guying - self-supporting
Construction - All welded construction with leg guides and "W" configuration torsion resistant bracing
Material - all steel
Plating - hot-dipped galvanized
Wind Survival (fully extended with max. load) - 60 mph (96.55 kmph)
Antenna Load Limits - 16 square feet (1.488 square meters)
5 ELEMENT 2M WITH Only $59.95!
MOTOR, HAM IV/T2XOnly $69.95!